Notes on the setting items
BAUD RATE | 1200, 2400, 4800, 9600, 19200, 38400 (bps) | |
Data bits | 7, 8 (bit) | |
Parity | NON, EVEN, ODD | |
Stop bits | 1, 2 (bit) | |
Handshake
| AUTO (MGL-IIc) | HARD, ENQACK, X-PRM, SOFT |
MGL-IIc | HARD, ENQACK, X-PRM, SOFT | |
MGL-Ic1 | HARD, XONOFF | |
Step size
| AUTO (MGL-IIc) | 0.025 (mm) |
AUTO (MGL-Ic1) | 0.05 (mm) | |
MGL-IIc | 0.025, 0.01 (mm) | |
MGL-Ic1 | 0.05, 0.025, 0.1 (mm) | |
Close time*1 | 3 to 60 (Seconds) | |
- Sets the data interval for multiple sheet cutting, and the waiting time before start of dividing cutting or sorted output. The value can be set from 3 to 60 seconds. If no data is received within the time set after cutting has ended, it is determined that one set of data has ended, allowing separation from the next set of data.
