2. Before Using This Machine
3. Connect host computer to machine.
4. Using a LAN Cable

1. Connect host computer to machine.

Using a LAN Cable

Connect a host computer to this machine using a LAN cable. Insert a LAN cable until it engages with a click.

• Do not unplug the cable while data is being transferred.

Network Connection Precautions

Make sure the network is set up as follows: Cutting will not be possible if the network is not set up correctly.

• Use a Category 5 or higher LAN cable.
• The host computer must be located on the same network as this machine. This product cannot be connected via a router.
• Use a 100BASE-TX compatible computer or switching hub. Cutting requires 1000BASE-TX support.

Checking the LAN connection

1. Check the lamp on the LAN connector.

• The LAN connector lamp illuminates when this machine is running.