Transmit Test

Press the [FUNCTION] key in local mode.

Use to select [SET UP], then press the [ENTER/HOLD] key.

Use to select [EVENT MAIL], then press the [ENTER/HOLD].

Use to select [Test], then press the [ENTER/HOLD] key.

Press the [ENTER/HOLD] key on the [EXECUTE] screen.

The transmission results are displayed.

An error code will be displayed if the test email transmission is unsuccessful. Refer to the error code list and take appropriate action.

LCD figure of test mail error

Emails may not necessarily be delivered even if they have been sent. Check the terminal receiving the email for spam email filters.
For more information on server settings or other topics, contact your network administrator or service provider.

Press the [END] key several times to exit.

Error Code List

Error code	Likely cause	Corrective action
10	Network connection error	Check to confirm that this machine is connected to a network. Check the IP address for this machine. Check if the network setup allows this machine to use DNS.
20	No valid email address	Enter a valid email address.
11003 11004	No POP server could be found. Or the DNS server could not be accessed.	Check the POP server address. Check if the network setup allows this machine to use DNS.
11021	Unable to connect to POP server	Check the POP server settings. Check the firewall settings.
12010	An error was returned from the POP server.	Check the POP server settings.
13000	POP authentication failed.	Check the user name and password. Check the APOP settings. Check the authentication method.
10013 10014	No SMTP server could be found. Or the DNS server could not be accessed.	Check the SMTP server address. Check if the network setup allows this machine to use DNS.
10021	Unable to connect to SMTP server	Check the SMTP server settings. Check the SMTP port number. Check the firewall settings.
10* 11* 20* 21*	An error was returned from the SMTP server. Or there was no response.	Check the SMTP server settings. Communication is not possible with a server that requires SSL communication. Check the protocol filter settings.
12***	The sender email address is invalid.	Set an email address corresponding to the server account.
13***	The email recipient could be found Or the email address is invalid.	Check the email address. This error may not always be detected even if the email address is incorrect. Set an email address corresponding to the server account.
22000 22008	SMTP authentication error	Check the authentication method.
23* 24* 25***	SMTP authentication failed.	Check the user name and password.

*** is the error code received from the mail server

If the error persists, wait a while before retrying.