2. Before Using This Machine
3. Connecting the Power Cable

1. Before Using This Machine

Connecting the Power Cable

1. Check to confirm that the machine power supply is off.

• Turning Off the Power

2. Attach the power cable clamp (accessory).

• Insert the power cable clamp into the power cable clamp hole.

• Check that the power cable clamp is securely attached by tugging on it.

3. Plug the power cable into the inlet of the machine.

4. Slide the power cable clamp out to an appropriate position.

• To slide the power cable clamp out, push up the tab underneath.

• The tab does not need to be pushed up when sliding the power cable clamp in.

5. Pass the power cable through the power cable clamp to secure it in place.

6. Slide the power cable clamp in.

7. Plug the power plug into the power outlet.

• Do not handle the power plug with wet hands. Disregarding this precaution may result in electric shock.

• Be sure to ground the machine. It is extremely dangerous to use the machine without grounding it, due to the risk of electric shock or machine damage.
  

• When using a two-pin power outlet, insert the plug of the power cable into the ground adapter provided.
  
• Connect the green wire (ground wire) of the ground adapter to ground. If grounding is not possible, contact an electrical contractor for assistance.