Turning On the Power
- Before turning on the power, check to confirm that the pinch rollers are raised.
- Turn on the host computer first, then turn on power switch for this machine on. A malfunction may occur if power is not turned on in this sequence.
- Wait at least 5 seconds after turning off power before turning it on again.
- Turn on the power to the host computer.
- Turn the power switch to "I".
- Modes can be selected after the power has been turned on. Refer to MENU mode.
- The blue POWER lamp lights up.
- Initialization is performed.
- The currently selected tool conditions are displayed once origin detection is complete.
