Rear
No. | Name | Outline |
|---|---|---|
1 | Clamp pressure lever | Selects high or low pressure to clamp the sheet. ClampSetting the Clamp High/Low Mode |
2 | Center clamp on/off lever | Enables and disables the center clamp. Disabling the center clamp offers the following benefits: Enabling and Disabling the center clamp
|
3 | SHEET sensor | Detects whether a sheet is present and detects the sheet length. SHEET sensor |
4 | Tray | Tray used for placing small items such as retractable knives and various types of cutters. Tray |
5 | Roll stopper (CG-100/130AR only) | Prevents the roll sheet from rotating when loading a sheet. Loading a Roll Sheet (CG-100/130AR) (The legs are options available separately for the CG-60AR.) |
6 | Roll bars | A roll sheet is loaded on top of the two bars. Loading a Roll Sheet (CG-100/130AR) (The legs are options available separately for the CG-60AR.) |
7 | Roll holder (CG-100/130AR only) | Clamps the two ends of a roll sheet. Clamp the roll sheet using the roll holders. |
8 | RS-232C interface connector | An RS-232C interface connector. Using an RS-232C Cable |
9 | USB interface connector | A USB interface connector. Using a USB Cable |
10 | LAN connector | A LAN connector. Using a LAN Cable |
11 | AC inlet | Used to connect the power cable (provided). Connecting the Power Cable |
