• You can manually cut it, or you can use the auto-cut function to automatically detach it from a specified distance from the end of the data.

[Manual cutting]
Settings such as the number of cuts depend on [AUTO. CUT] settings.
Please refer to [AUTO. CUT] settings here.

---

---

(1) Switch to Local mode.

(2) Move the sheet to the desired cutting position in Jog Mode.
See the followings.
The cutter will pass through the yellow area on the platen.
Move the sheet to the desired cutting position.

---

---

(3) Execute [PAPER CUT].

[Automatic cutting]
* When using our cutting software "FineCut"
Display the FineCut plot window and set "Auto Cut" configuration before executing the plot.
Settings such as the number of cuts depend on the main unit's "Auto-cut settings".
Refer to the main unit's Auto-cut settings here.

---

---

---

* When setting "Auto cut" on the plotter.
Refer to the main unit's Auto-cut settings here.

---