台灣御牧股份有限公司

UJF-3042MkII [停止販售]

Mimaki Driver Ver.5.6.9 (32bit)

類型 Device Driver
版本 5.6.9
更新日期 2023年03月16日
支援OS Windows 8.1 (32bit)
Windows 10 (32bit)
對應機種 APC-130, CF3-1610M, CF3-1610R1, CF3-1610TF2, CF3-1631M, CF3-1631R1, CF3-1631TF2, CF22-1225RC-S, CF22-1225RT-S, CF22-1225T-S, CF22-1225TD-S, CF22-1225TF-S, CG-60AR, CG-60SRIII, CG-75FXII, CG-75FXII Plus, CG-100AR, CG-100SRIII, CG-130AR, CG-130FXII, CG-130FXII Plus, CG-130SRIII, CG-160FXII, CG-160FXII Plus, CJV150-75, CJV150-75BS, CJV150-107, CJV150-107BS, CJV150-130, CJV150-130BS, CJV150-160, CJV150-160BS, CJV300-130, CJV300-130 Plus, CJV300-130BS, CJV300-160, CJV300-160 Plus, CJV300-160BS, CJV330-130, CJV330-160, JFX600-2513, JV100-160, JV150-130, JV150-130A, JV150-130BS, JV150-160, JV150-160A, JV150-160BS, JV300-130, JV300-130 Plus, JV300-130A, JV300-130BS, JV300-160, JV300-160 Plus, JV300-160A, JV300-160BS, JV300-190, JV330-130, JV330-160, TS100-1600, TS330-1600, TxF150-75, UCJV300-75, UCJV300-107, UCJV300-130, UCJV300-160, UJF-3042MkII, UJF-3042MkII EX, UJF-3042MkII EX e, UJF-3042MkII e, UJF-6042MkII, UJF-6042MkII e, UJF-7151 plus, UJF-7151 plusII, UJF-A3MkII, UJF-A3MkII EX, UJV100-160

About support for 32bit and Windows8.1 ended

Microsoft support for Windows 8.1 ended on January 10, 2023.
Along with this, RasterLink7 and Mimaki Driver support for 32bit and Windows8.1 will be ended.
This version is the final version that can be operated in 32bit and Windows8.1.
Later version will only be in 64bit and operate in Windows10 or above.
In order to use the latest version of RasterLink7, PC with Windows11/Windows10(64bit) is recommended.

The following functions have been change

[Ver.5.6.8 -> Ver.5.6.9]

The following models are available.

  • TxF150

 The following defects have been improved.

  • When using nozzle recovery on two layers, the panel may indicate that some nozzles are not recoverable even though nozzle recovery is possible.

        [Target printer] JV330, CJV330

[Ver.5.6.7 -> Ver.5.6.8] 

 The following defects have been improved.

  • When setting [Step & Repeat] and print, printing speed slows down.
  • When combining [RIP and Print] and [Tiling], the left edge of the second and subsequent tiles may be cut off by several centimeters.
  • At MkII and MkIIe, discharged result has changed only specific data.
  • JFX600 which mounted LUS-120 four colors are not displayed on the printer registration screen, and the printer cannot be registered.
  • The layer output icon is not displayed on the thumbnail image during 2.5D printing/ composite printing.
  • When combining the pre-print margin and [Step & Repeat], a portion of the printing area is output without printing.

[Ver.5.6.6 -> Ver.5.6.7] 

  • When using RasterLink7, primer recommended density has been supported at LH-100 and LUS-120 in JFX600
  • The following defects have been improved.

When using RasterLink7, white ink at higher density printing cannot be executed in the combinations of printer and ink set described below.

UJF-6042MkIIe、UJF-3042MkII Ex e     Ink set: CMYKClPrWW

[Ver.5.6.5 -> Ver.5.6.6]

  • Improved operation during Ethernet communication.

[Ver.5.6.4 -> Ver.5.6.5]

 The following defects have been improved.

  • When nozzle recovery is enabled, an error may occur during output.

        [Target printer] JV300, JV150, CJV300, CJV150

[Ver.5.6.3 -> Ver.5.6.4]

  • The following Colors are available in JFX600.

        LUS-120 4Color / 6Color+SP / 4Color+SP

[Ver.5.6.2.2 -> Ver.5.6.3]

 The following defects have been improved.

  • Cannot output from FineCoat when using DCF-605PU.
  • When using combination of USB1.1 and Windows10/11, connection may not be possible depending on state of PC UCSI device (USB type-C).

[Target printer] USB1.1 device (CG-SR2, CG-FXII)

[Ver.5.6.2 -> Ver.5.6.2.2]

 The following defects have been improved.

  • Fix the defect that may cause graininess when printed with Hi scan.

[Target printer] UJV100 4C+SP, UJV100 SP+4C, JV100 8C

[Ver.5.6.1 -> Ver.5.6.2]

  • The following models are available.

        JV330, CJV330, TS330

  • LUS-200 ink is available in the following printers.

        UJF-3042MkII, UJF-3042MkII EX, UJF-6042MkII

  • The following Colors are available in JFX600.

        LUS-150 4Color, LUS-150 6Color+SP

[Ver.5.6.0 -> Ver.5.6.1]

  • LUS-210 ver2 ink is available in UJV100.

[Ver.5.5.3 -> Ver.5.6.0]

  • LUS-200 ink is available in the following printers.
    UJF-3042MkII e, UJF-3042MkII Ex e, UJF-6042MkII e

[Ver.5.5.2 -> Ver.5.5.3]

     The following defects have been improved.

  • For a job of color layer or white layer, illuminance does not change at printing even after illuminance of UV mode is changed and printing is executed.

[Ver.5.5.1 -> Ver.5.5.2]

  • In JFX600, Glossy Print can be selected by UV mode of clear plate.
  • In JFX600, following Special Color Over Print is available.

[Ver.5.5.0 -> Ver.5.5.1]

  • Added support for silver ink on the UJF-7151plusII.

[Ver.5.4.2 -> Ver.5.5.0]

  • The following models are available.

        UJF-7151plusII, UJF-6042MkIIe, UJF-3042MkIIe, UJF-3042MkII EXe

[Ver.5.4.1 -> Ver.5.4.2]

  • The following models are available.

        UCJV300

[Ver.5.4.0 -> Ver.5.4.1]

  • The following models are available.

        UJF-7151, UJF-6042MkII, UJF-3042MkII, UJF-3042MkII EX, UJF-A3MkII, UJF-A3MkII EX

[Ver.5.3.3 -> Ver.5.4.0]

  • The following models are available.

        JV300, JV150, JV300Plus, CJV300, CJV150, CJV300Plus

[Ver.5.3.0 -> Ver.5.3.3]

  • Image quality defects that occur under certain conditions have been improved.

[Ver.5.1.0 -> Ver.5.3.0]

  • TS100 are available.
  • Improved operation during Ethernet communication. (JV100, UJV100)

[Ver.5.1.0]

  • JV100 is available.

 


 

下載時的注意事項

下載本軟體前,請務必閱讀以下的使用許可協定。

軟體使用許可條款

若下載本軟體,則視同您同意受本協定所約束。

第1條.定義
  1. 此處所稱的「軟體」,指與本協定一同提供的電腦程式。
  2. 此處所稱的「相關資料」,指與本軟體一同提供的印刷文件檔案,或是敝公司之後所提供的印刷資料。
  3. 此處所稱的「本軟體」,指敝公司提供給客人的軟體、相關資料、及軟體的複製檔。
第2條.限制事項
  1. 根據本協定的條款,禁止複製本軟體。
  2. 禁止更改本軟體及進行逆向工程。此外,禁止轉讓、租賃、再授權給第三方,亦禁止移轉本協定的地位。
  3. 禁止透過租賃或疑似租賃行為將本軟體轉讓、授權或轉賣給第三方,亦禁止從第三方讓渡、接受使用權或購買。
  4. 禁止將本軟體當作二手品讓渡、授權給第三方,亦禁止從第三方接受使用權。
第3條.責任限制
  1. 軟體所含有的功能並不保證完全符合顧客的使用目的。
  2. 選擇安裝本軟體為顧客的行為責任,在電腦硬碟或繪圖器記憶體中安裝本軟體時,並不為其相關損害或操作上的損害做擔保。
  3. 關於本軟體的使用結果(包含收入或利益的損失),敝公司並不做任何責任上的擔保。
第4條.有效期限
  1. 本協定的有效期限是從顧客安裝本軟體開始算起。
  2. 顧客決定停止使用軟體時,本協定則自動終止。
  3. 顧客無法遵守本協定的條款時,毋須敝公司的通知,本協定即立刻終止。本協定終止時,請務必刪除本軟體的所有檔案。
下載 MimakiDriver-v5.6.9-32bit.exe(69.39MB)

回到上一頁的一覽表

Return to Content

回頁面頂端