台灣御牧股份有限公司

FineCut/Coat9 for Illustrator

FineCut/Coat9 for Illustrator Ver2.4 Mac (Illustrator 2019 - 2022 (macOS 10.15~macOS 12))

類型 Software
版本 2.4
更新日期 2022年06月30日
支援OS macOS 10.15.x
macOS 11.x
macOS 12.x
FineCut/Coat9 for Illustrator
Adobe Illustrator CC2019/2020/2021/2022 English/German/French/Italian/Spanish/Russian/Simplified Chinese/Traditional Chinese

About this Upgrade software

  • FineCut9 serial key or FineCut/Coat9 serial key is required after software updating.
  • Free upgrade to FineCut/Coat9 from FineCut8 is available if you have FineCut8 CD-ROM.
  • How to issue a FineCut9 serial key from FineCut8 CD-ROM, please see here.

About installer and others

  • FineCut / Coat9 does not work properly with Illustrator 2021 Ver25.0 to Ver25.2.0.
    Please use Illustrator 2021 Ver25.2.1 or later.
  • When installation of FineCut/Coat9 in macOS is failed, please refer to here to take measures.
  • How to recognize [KeySpan] USB conversion adapter on macOS High Sierra(10.13) from here.
  • The serial key issuing tool (DiscChecker) does not support macOS 12.0 or later. Issue a serial key with a Mac which has installed macOS 11 or less, or Windows PC.
  • This software cannot be installed in OS that is earlier than MacOS X 10.15. Please use this when you use OS that earlier than MacOS X 10.15.

The following functions have been change

[Ver2.3 -> Ver2.4]

- Improved function -

  1. Mimaki Register marks SDK is supported.
    Register marks which created based on the Mimaki Register marks SDK with third party software can be recognized by FineCut.

[Ver2.2 -> Ver2.3]

- Improved function -

  1. CG-AR series is supported.
    With the division cutting function, cut misalignment due to sheet meandering can be suppressed.
  2. CJV330 series is supported.

-Fixed bugs-

  1. When installing on macOS 12.1 or later, "Adobe Illustrator was not found ...." is displayed.

[Ver2.1 -> Ver2.2]

- Improved function -

  1. Illustrator 2022 is now supported.
  2. macOS 12 (Monterey) is now supported.

-Fixed bugs-

  1. When the cut data is created using the following functions, it is printed by RasterLink5.
    Frame Extraction / Outline Tool / Move to the Cut Layer / Register Mark Creation [Leave a rectangle as the cutting line].
  2. When "Online information" is started, [Error in the parameter.] is displayed and information cannot be obtained.
  3. Even if [Leaf Mode] is specified in [Detect Mark] function of Plot dialog, it will return to [Roll Mode] when [Detect Mark] is executed at the next time.

[Ver2.0 -> Ver2.1]

- Improved function -

  1. Illustrator (Ver25.3 or later) which supports native support to Apple Silicon is supported.
    FineCut/Coat9 for Illustrator Ver2.1 is supported only in the following System requirements.
    Chip Intel Apple Silicon M1 Chip
    Illustrator (Ver25.3 or later) Running mode - Rosetta Native
    macOS Appearance Light Dark Light Dark Light Dark
    FineCut9 Ver1.5 × × × × × ×
    FineCut9 Ver1.6 - 2.0 × × × ×
    FineCut/Coat9 Ver2.1

-Fixed bugs-

  1. Illustrator exits incorrectly when executing Frame Extraction, Create Shadow / Edge, Trapping, Create Weed Line on Illustrator 2021 (Ver25.4.1).

[Ver1.6 -> Ver2.0]

- Improved function -

  1. The product name has been changed.
    FineCut9 -> FineCut/Coat9

-Fixed bugs-

  1. Fixed the problem that the import / export of the output condition fails depending on the save location of the Output Condition file.
  2. Fixed the problem that the installation is failed in some environments.

[Ver1.5 -> Ver1.6]

- Improved function -

  1. Illustrator 2021 (Ver25.3) is supported.
    FineCut9 for Illustrator Ver1.6 is supported only in the following System requirements.
    Chip Intel Apple Silicon M1 Chip
    Illustrator (Ver25.3 or later) Running mode - Rosetta Native
    macOS Appearance Light Dark Light Dark Light Dark
    FineCut9 Ver1.5 × × × × × ×
    FineCut9 Ver1.6 × × × ×

-Fixed bugs-

  1. Even if EPS option or Adobe PDF save dialog is canceled with ID cut, the cut command is outputted.

[Ver1.4 -> Ver1.5]

- Improved function -

  1. macOS 11 (Big Sur) is supported.
  2. Illustrator 2021 is supported.

-Fixed bugs-

  1. Fixed a bug in which guidelines created by compound paths were output as cut lines.
  2. Fixed a bug in which login user names containing double-byte characters would be recognized as guest users.
  3. Illustrator may crash when using [LineEdit] tool has been fixed.
  4. Fixed a bug in which exporting the output condition with a folder name or file name that contains double-byte characters will fail.

[Ver1.3 -> Ver1.4]

-Fixed bugs-

  1. In CF22-1225, the issue that [Reverse Cut Mode] may not be performed correctly has been fixed.
  2. On macOS 10.15, FineCut9 serial key cannot be issued by the serial key issuing tool  problem has been fixed.
  3. A crash problem when FineCut9 is installed on the Korean version of Illustrator has been fixed.
  4. The new information of FineCut9 can be acquired through the online information from this version.

[Ver1.2 -> Ver1.3]

- Improved function -

  1. Illustrator 2020 is supported.

-Fixed bugs-

  1. In some models, wrong value was displayed as a recommended register mark size in FineCut. The wrong value has been corrected .
  2. The output condition setting function by each color and layer for CF3 (M head) can be now used.

[Ver1.1 -> Ver1.2]

- Newly Support -

  1. macOS 10.15 (Catalina) is supported.

[Ver1.0 -> Ver1.1]

- Improved function -

  1. CJV300 Plus is supported.
  2. CG-FXⅡPlus is supported.

[FineCut8 Ver8.7.7 -> FineCut9 Ver1.0]

- Fixed bugs -

  1. When operating weed line in the Weed Line dialog, a problem with slow operation occurred.
  2. The maximum number of favorites have been increased from 10 to 250, so that the problem, the favorite was not registered when there were more than 10 layer colors.
  3. Size in plot preview dialog was not be able to be changed smoothly with mouse.
  4. List display disappeared when you moved the color/layer in the plot preview dialog.
  5. The output condition was not able to be saved by accounts other than the administrator privilege.

New functions of FineCut/Coat9

New functions

  1. It can be now outputted directly to Trotec Speedy 100/300/360/400.
    It can be outputted by the procedure that outputs to Mimaki plotter.
    Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
  2. CJV300 Plus is supported.
  3. CG-FXII Plus is supported.

About manuals

Download from here.

下載時的注意事項

下載本軟體前,請務必閱讀以下的使用許可協定。

軟體使用許可條款

若下載本軟體,則視同您同意受本協定所約束。

第1條.定義
  1. 此處所稱的「軟體」,指與本協定一同提供的電腦程式。
  2. 此處所稱的「相關資料」,指與本軟體一同提供的印刷文件檔案,或是敝公司之後所提供的印刷資料。
  3. 此處所稱的「本軟體」,指敝公司提供給客人的軟體、相關資料、及軟體的複製檔。
第2條.限制事項
  1. 根據本協定的條款,禁止複製本軟體。
  2. 禁止更改本軟體及進行逆向工程。此外,禁止轉讓、租賃、再授權給第三方,亦禁止移轉本協定的地位。
  3. 禁止透過租賃或疑似租賃行為將本軟體轉讓、授權或轉賣給第三方,亦禁止從第三方讓渡、接受使用權或購買。
  4. 禁止將本軟體當作二手品讓渡、授權給第三方,亦禁止從第三方接受使用權。
第3條.責任限制
  1. 軟體所含有的功能並不保證完全符合顧客的使用目的。
  2. 選擇安裝本軟體為顧客的行為責任,在電腦硬碟或繪圖器記憶體中安裝本軟體時,並不為其相關損害或操作上的損害做擔保。
  3. 關於本軟體的使用結果(包含收入或利益的損失),敝公司並不做任何責任上的擔保。
第4條.有效期限
  1. 本協定的有效期限是從顧客安裝本軟體開始算起。
  2. 顧客決定停止使用軟體時,本協定則自動終止。
  3. 顧客無法遵守本協定的條款時,毋須敝公司的通知,本協定即立刻終止。本協定終止時,請務必刪除本軟體的所有檔案。
下載 FC924AIEN1015.dmg(61.58MB)

回到上一頁的一覽表

Return to Content

回頁面頂端