FineCut/Coat9 for Illustrator Ver2.5 Windows (Illustrator CS6 - 2023 (32 bit/64 bit))
| 類型 | Software |
|---|---|
| 版本 | 2.5 |
| 更新日期 | 2023年01月31日 |
| 支援OS |
Windows 7 Windows 7 (32bit) Windows 7 (64bit) Windows 8.1 Windows 8.1 (32bit) Windows 8.1 (64bit) Windows 10 Windows 10 (32bit) Windows 10 (64bit) Windows 11 |
| FineCut/Coat9 for Illustrator | |
| Adobe Illustrator CS6/CC/CC2014/CC2015/CC2015.3/CC2017/CC2018/CC2019/2020/2021/2022/2023 (32 bit/64 bit) English/German/French/Italian/Spanish/Russian/Simplified Chinese/Traditional Chinese |
About this Upgrade software
- FineCut9 serial key or FineCut/Coat9 serial key is required after software updating.
- Free upgrade to FineCut/Coat9 from FineCut8 is available if you have FineCut8 CD-ROM.
- How to issue a FineCut9 serial key from FineCut8 CD-ROM, please see here.
For FineCut/Coat9 Ver2.3 or less users
- The register mark created with FineCut/Coat9 Ver2.4 or later cannot be recognized by FineCut/Coat9 Ver2.3 or less.
If you want to recognize register mark created with FineCut/Coat9 Ver2.3 or less, create them with FineCut/Coat9 Ver2.3 or less.Register Mark Creation Ver Register Mark Detection Ver Ver2.3 or less Ver2.4 or later Ver2.3 or less ✔ ✔ Ver2.4 or later N/A ✔
The following functions have been change
[Ver2.4 -> Ver2.5]
- Improved function -
- Illustrator 2023 is now supported.
-Fixed bugs-
- Fixed a bug that the cutting with tool which you specified may not be executed in CF3 series.
[Ver2.3 -> Ver2.4]
- Improved function -
- Mimaki Register marks SDK is supported.
Register marks which created based on the Mimaki Register marks SDK with third party software can be recognized by FineCut.
[Ver2.2 -> Ver2.3]
- Improved function -
- CG-AR series is supported.
With the division cutting function, cut misalignment due to sheet meandering can be suppressed. - CJV330 series is supported.
[Ver2.1 -> Ver2.2]
- Improved function -
- Illustrator 2022 is now supported.
- Windows 11 is now supported.
* Camera for Gravotech laser is not supported.
-Fixed bugs-
- When the cut data is created using the following functions, it is printed by RasterLink5.
Frame Extraction / Outline Tool / Move to the Cut Layer / Register Mark Creation [Leave a rectangle as the cutting line]. - Even if [Leaf Mode] is specified in [Detect Mark] function of Plot dialog, it will return to [Roll Mode] when [Detect Mark] is executed at the next time.
[Ver2.0 -> Ver2.1]
-Fixed bugs-
- Illustrator exits incorrectly when executing Frame Extraction, Create Shadow / Edge, Trapping, Create Weed Line on Illustrator 2021 (Ver25.4.1).
[Ver1.5 -> Ver2.0]
- Improved function -
- The product name has been changed.
FineCut9 -> FineCut/Coat9
[Ver1.4 -> Ver1.5]
- Improved function -
- Illustrator 2021 is now supported.
-Fixed bugs-
- Fixed a bug in which guidelines created by compound paths were output as cut lines.
[Ver1.3 -> Ver1.4]
-Fixed bugs-
- In CF22-1225, the issue that [Reverse Cut Mode] may not be performed correctly has been fixed.
- In Gravotech laser, the color in the [Cutting Direction] displayed correctly on the [Preview] dialog.
- A crash problem when FineCut9 is installed on the Korean version of Illustrator has been fixed.
- The new information of FineCut9 can be acquired through the online information from this version.
[Ver1.2 -> Ver1.3]
- Improved function -
- Illustrator 2020 is now supported.
- Camera for Gravotech laser is now supported.
- The register marks are detected by the camera automatically to output.
- The new function can be used only by the Gravotech laser model with camera.
-Fixed bugs-
- In some models, wrong value was displayed as a recommended register mark size in FineCut. The wrong value has been corrected.
- The output condition setting function by each color and layer for CF3 (M head) can be now used.
[Ver1.1 -> Ver1.2]
- Fixed bugs -
- "The program can’t start because MSVCP140.dll is missing from your computer." error message is displayed when starting Illustrator.
[Ver1.0 -> Ver1.1]
- Improved function -
- CJV300 Plus is supported.
- CG-FXⅡPlus is supported.
[FineCut8 Ver8.7.6 -> FineCut9 Ver1.0]
- Improved function -
- The UI display was cut off.
- When operating weed line in the Weed Line dialog, a problem with slow operation occurred.
- The maximum number of favorites have been increased from 10 to 250, so that the problem, the favorite was not registered when there were more than 10 layer colors.
- Size in plot preview dialog was not be able to be changed smoothly with mouse.
New functions of FineCut/Coat9
New functions
- It can be now outputted directly to Trotec Speedy 100/300/360/400.
It can be outputted by the procedure that outputs to Mimaki plotter.
Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark. - It can be now outputted directly to Gravotech LS series.
(Gravotech driver installation is required.)
It can be outputted by procedure that outputs to Mimaki plotter.
Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark. - CJV300 Plus is supported.
- CG-FXII Plus is supported.
For Gravotech LS series users
Please download the driver from this Gravotech's site and install it according to the manual of the same site.
About manuals
Download from here.
下載時的注意事項
下載本軟體前，請務必閱讀以下的使用許可協定。
軟體使用許可條款
若下載本軟體，則視同您同意受本協定所約束。
第1條.定義
- 此處所稱的「軟體」，指與本協定一同提供的電腦程式。
- 此處所稱的「相關資料」，指與本軟體一同提供的印刷文件檔案，或是敝公司之後所提供的印刷資料。
- 此處所稱的「本軟體」，指敝公司提供給客人的軟體、相關資料、及軟體的複製檔。
第2條.限制事項
- 根據本協定的條款，禁止複製本軟體。
- 禁止更改本軟體及進行逆向工程。此外，禁止轉讓、租賃、再授權給第三方，亦禁止移轉本協定的地位。
- 禁止透過租賃或疑似租賃行為將本軟體轉讓、授權或轉賣給第三方，亦禁止從第三方讓渡、接受使用權或購買。
- 禁止將本軟體當作二手品讓渡、授權給第三方，亦禁止從第三方接受使用權。
第3條.責任限制
- 軟體所含有的功能並不保證完全符合顧客的使用目的。
- 選擇安裝本軟體為顧客的行為責任，在電腦硬碟或繪圖器記憶體中安裝本軟體時，並不為其相關損害或操作上的損害做擔保。
- 關於本軟體的使用結果（包含收入或利益的損失），敝公司並不做任何責任上的擔保。
第4條.有效期限
- 本協定的有效期限是從顧客安裝本軟體開始算起。
- 顧客決定停止使用軟體時，本協定則自動終止。
- 顧客無法遵守本協定的條款時，毋須敝公司的通知，本協定即立刻終止。本協定終止時，請務必刪除本軟體的所有檔案。
