• 回到上一頁的一覽表

FineCut/Coat9 for CorelDRAW Ver2.3.1 (CorelDRAW X7 ~ 2021 (32 bit/64 bit))

類型	Software
版本	2.3.1
更新日期	2022年04月28日
支援OS	Windows 7 Windows 7 (32bit) Windows 7 (64bit) Windows 8.1 Windows 8.1 (32bit) Windows 8.1 (64bit) Windows 10 Windows 10 (32bit) Windows 10 (64bit) Windows 11
備註	CorelDRAW® Graphics Suite X7/X8/2017/2018/2019/2020/2021 (32 bit/64 bit) English/German/Italian/French/Portuguese/Spanish/Russian/Simplified Chinese/Traditional Chinese CorelDRAW® Technical Suite X7/2017/2018/2019/2020/2021 (32 bit/64 bit) English/German/French
	FineCut/Coat9 for CorelDRAW

About this Upgrade software

• FineCut9 serial key or FineCut/Coat9 serial key is required after software updating.
• Free upgrade to FineCut/Coat9 from FineCut8 is available if you have FineCut8 CD-ROM.
• How to issue a FineCut9 serial key from FineCut8 CD-ROM, please see here.

The following functions have been change

[Ver2.3 -> Ver2.3.1]

-Fixed bugs -

1. The serial key attached to the FineCut/Coat9 package cannot be authenticated.

[Ver2.2 -> Ver2.3]

- Improved function -

1. CG-AR series is supported.
   With the division cutting function, cut misalignment due to sheet meandering can be suppressed.
2. CJV330 series is supported.

[Ver2.1 -> Ver2.2]

- Improved function -

1. CorelDRAW Technical Suite 2021 is supported.
2. Windows 11 is now supported.
   * Camera for Gravotech laser is not supported.

-Fixed bugs -

1. When the cut data is created using the following functions, it is printed by RasterLink5.
   Frame Extraction / Outline Tool / Move to the Cut Layer / Register Mark Creation [Leave a rectangle as the cutting line].

[Ver2.0 -> Ver2.1]

- Fixed bugs -

1. The arrow to specify the cut direction deviates from the design.

[Ver1.6 -> Ver2.0]

- Improved function -

1. The product name has been changed.
   FineCut9 -> FineCut/Coat9

[Ver1.4 -> Ver1.6]

- Improved function -

1. CorelDRAW Graphics Suite 2021 is now supported.

-Fixed bugs -

1. Origin is shifted when Origin Lock is ON and move object by using Direct Select Tool.
2. When outputting ID cut without register marks, the print and the cut line are out of alignment.
3. Even if EPS option or Adobe PDF save dialog is canceled with ID cut, the cut command is outputted.

[Ver1.3 -> Ver1.4]

- Improved function -

1. CorelDRAW 2020 is now supporeted.

-Fixed bugs -

1. The new information of FineCut9 can be acquired through the online information from this version.

[Ver1.1 -> Ver1.3]

- Improved function -

1. Camera for Gravotech laser is now supporeted.
   • The register marks are detected by the cameraautomatically to output.
   • The new function can be used only by the Gravotech laser model with camera.

-Fixed bugs -

1. In some models, wrong value was displayed as a recommended register mark size in FineCut. The wrong value has been corrected.
2. The output condition setting function by each color and layer for CF3 (M head) can be now used.
3. When register marks were recognized during CF3 (M head), the cut preview display was misaligned. The problem has been improved.

[Ver1.0 -> Ver1.1]

- Improved function -

1. CJV300 Plus is supported.
2. CG-FXⅡPlus is supported.

New functions of FineCut/Coat9

1. It can be now outputted directly to Trotec Speedy 100/300/360/400.
   It can be outputted by the procedure that outputs to Mimaki plotter.
   Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
2. It can be now outputted directly to Gravotech LS series.
   (Gravotech driver installation is required.)
   It can be outputted by procedure that outputs to Mimaki plotter.
   Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
3. CJV300 Plus is supported.
4. CG-FXII Plus is supported.

For Gravotech LS series users

Please download the driver from this Gravotech's site and install it according to the manual of the same site.

About manuals

Download from here.

下載時的注意事項

下載本軟體前，請務必閱讀以下的使用許可協定。

回到上一頁的一覽表