PICT Up ver1.40 Installer (64bit)
| 類型 | Software |
|---|---|
| 版本 | 1.40 Full Installer |
| 更新日期 | 2024年10月22日 |
| 支援OS |
Windows 10 (64bit) Windows 11 |
| Mimaki Cloud Technology PICT |
Upgrade Information of PICT ver1.4.0
・Supported display following information on CFX Series. (FW version v1.6 or later)
(1)Machine Status
(2)Cut Results *1
(3)Cut Job History *1
*1 At the time of the release of PICT v1.4.0, displaying "Cut Results" and "Cut Job History" is only supported on the CFX series.
Upgrade Information of PICT Up ver1.40
・Supports uploading cutting-related data.
・Bug fix.
SW/FW version that supports job name display
・Supported models and versions are as follows. (As of October 22, 2024)
Plan to support models that are currently unsupported in the future.
| Supported models | Version | Remarks |
| JV330 Series | v3.1.0 or later | Mimaki Driver：v5.9.3 or later |
| CJV330 Series | v3.0.0 or later | Mimaki Driver：v5.9.3 or later |
| TS330-1600 | v3.0.0 or later | Mimaki Driver：v5.9.3 or later |
| UCJV330 Series | v1.2.0 or later | Mimaki Driver：v5.9.3 or later |
| TS330-3200DS | v1.1.0 or later | Mimaki Driver：v5.9.6 or later |
| CJV200 Series | v1.1.0 or later | Mimaki Driver：v5.9.6 or later |
| UJF-7151plusII | v3.0.0 or later | Mimaki Driver：v5.9.2 or later |
| UJF-6042MkII e | v3.0.0 or later | Mimaki Driver：v5.9.2 or later |
| UJF-3042MkII e | v3.0.0 or later | Mimaki Driver：v5.9.2 or later |
| UJV100-160Plus | v1.3.0 or later | Mimaki Driver：v5.9.6 or later |
| JFX200-1213/2513 EX | v3.0.0 or later | Mimaki Driver：v5.9.6 or later |
| JFX600-2513 | SystemPack v3.5 or later | |
| JFX600-2531 | SystemPack v4.01.1 or later | |
| Tiger600-1800TS | SystemPack v1.2 or later | |
| CFX Series | v1.6.0 or later | Supported only for output from FineCut9 v3.2.0 or later |
PICT organization registration or sign-in
Please refer to Sign-in page.
Install PICT Up
Install or Update
- Extract the downloaded zip file "PICTUp-Installer.zip".
- Double-click "setup.exe" in the extracted folder.
- Install or update PICT Up according to installation wizard.
About manuals
Please refer to Manual page.
下載時的注意事項
下載本軟體前，請務必閱讀以下的使用許可協定。
軟體使用許可條款
若下載本軟體，則視同您同意受本協定所約束。
第1條.定義
- 此處所稱的「軟體」，指與本協定一同提供的電腦程式。
- 此處所稱的「相關資料」，指與本軟體一同提供的印刷文件檔案，或是敝公司之後所提供的印刷資料。
- 此處所稱的「本軟體」，指敝公司提供給客人的軟體、相關資料、及軟體的複製檔。
第2條.限制事項
- 根據本協定的條款，禁止複製本軟體。
- 禁止更改本軟體及進行逆向工程。此外，禁止轉讓、租賃、再授權給第三方，亦禁止移轉本協定的地位。
- 禁止透過租賃或疑似租賃行為將本軟體轉讓、授權或轉賣給第三方，亦禁止從第三方讓渡、接受使用權或購買。
- 禁止將本軟體當作二手品讓渡、授權給第三方，亦禁止從第三方接受使用權。
第3條.責任限制
- 軟體所含有的功能並不保證完全符合顧客的使用目的。
- 選擇安裝本軟體為顧客的行為責任，在電腦硬碟或繪圖器記憶體中安裝本軟體時，並不為其相關損害或操作上的損害做擔保。
- 關於本軟體的使用結果（包含收入或利益的損失），敝公司並不做任何責任上的擔保。
第4條.有效期限
- 本協定的有效期限是從顧客安裝本軟體開始算起。
- 顧客決定停止使用軟體時，本協定則自動終止。
- 顧客無法遵守本協定的條款時，毋須敝公司的通知，本協定即立刻終止。本協定終止時，請務必刪除本軟體的所有檔案。
