RasterLinkTools for CorelDRAW V1.17.0
| 類型 | Software |
|---|---|
| 版本 | 1.17.0 |
| 更新日期 | 2024年03月05日 |
| 支援OS |
Windows 10 Windows 10 (32bit) Windows 10 (64bit) |
| 備註 | CorelDRAW® Graphics Suite 2018/2019/2020 |
| RasterLink6Plus, RasterLink7 |
The following functions have been change
[Ver1.16.0 -> Ver1.17.0]
- Kebab - Processing for tapered shape function is supported.
[Ver1.15.0 -> Ver1.16.0]
- "High-speed Mode" and "Standard Mode" have been added in the Braille printing function.
Refer to the High-speed Braille Print Guide for details.
[Ver1.14.0 -> Ver1.15.0]
- Watermark Print function is now supported.
Refer to the Multilayer Printing Guide for details.
[Ver1.12.0 -> Ver1.14.0]
- This version supports CorelDRAW 2018-2020.
- The following bugs were fixed.
- When installing RasterLinkTools Ver.1.12.0 or less after installing FineCut/Coat9, Outline Tools of FineCut/Coat9 may not work properly.
[Ver1.11.0 -> Ver1.12.0]
- This version supports CorelDRAW 2017-2020.
- The following bugs were fixed.
- When you install RasterLinkTools after installing FineCut/Coat9 for CorelDRAW Ver2.4, FineCut/Coat9 may become extremely slow operation or freeze.
[Ver1.8.0 -> Ver1.11.0]
- The thickness specification of 2.5D Texture Maker function has changed from [Layers] to [Level].
[Ver1.7.1 -> Ver1.8.0]
- CorelDRAW 2020(32/64bit) is now supported.
- The following bugs were fixed.
- The new information of RasterLinkTools cannot be acquired through the online information.
[Ver1.7.0 -> Ver1.7.1]
- Setting names of 2.5D Texture Maker have been revised .
[Ver1.6.2 -> Ver1.7.0]
- High speed mode is now supported in 2.5D Texture Maker function .
[Ver1.6.0 -> Ver1.6.2]
- CorelDRAW 2019(32/64bit) is now supported.
- CorelDRAW 2018(32/64bit) is now supported.
[Ver1.4.1 -> Ver1.6.0]
- Newly functions -
- 2.5D Texture Maker function is now supported.
See the RasterLink6Plus manual for details.
[Ver1.3.1 -> Ver1.4.1]
- CorelDRAW 2017(32/64bit) is now supported.
- Newly functions -
- Multilayer printing function is now supported.
- Braille printing function is now supported.
See the RasterLink6Plus manual for details.
[Ver1.3 -> Ver1.3.1]
- CorelDRAW X8(32/64bit) is now supported.
[Ver1.2 -> Ver1.3]
- Newly functions -
- Print Special Color Layer is supported.(CorelDRAW X5 or later)
Perform [Output to RasterLink] for data that replaces the colors of the libraries shown below provided by Mimaki to automatically create a special color plate when reading into RasterLink6.- MIMAKI RasterLink Library
- MIMAKI SS21 Metallic Color Library
- MIMAKI SS21 Metallic Orange Color Library
About manuals
Download from here.
下載時的注意事項
下載本軟體前，請務必閱讀以下的使用許可協定。
軟體使用許可條款
若下載本軟體，則視同您同意受本協定所約束。
第1條.定義
- 此處所稱的「軟體」，指與本協定一同提供的電腦程式。
- 此處所稱的「相關資料」，指與本軟體一同提供的印刷文件檔案，或是敝公司之後所提供的印刷資料。
- 此處所稱的「本軟體」，指敝公司提供給客人的軟體、相關資料、及軟體的複製檔。
第2條.限制事項
- 根據本協定的條款，禁止複製本軟體。
- 禁止更改本軟體及進行逆向工程。此外，禁止轉讓、租賃、再授權給第三方，亦禁止移轉本協定的地位。
- 禁止透過租賃或疑似租賃行為將本軟體轉讓、授權或轉賣給第三方，亦禁止從第三方讓渡、接受使用權或購買。
- 禁止將本軟體當作二手品讓渡、授權給第三方，亦禁止從第三方接受使用權。
第3條.責任限制
- 軟體所含有的功能並不保證完全符合顧客的使用目的。
- 選擇安裝本軟體為顧客的行為責任，在電腦硬碟或繪圖器記憶體中安裝本軟體時，並不為其相關損害或操作上的損害做擔保。
- 關於本軟體的使用結果（包含收入或利益的損失），敝公司並不做任何責任上的擔保。
第4條.有效期限
- 本協定的有效期限是從顧客安裝本軟體開始算起。
- 顧客決定停止使用軟體時，本協定則自動終止。
- 顧客無法遵守本協定的條款時，毋須敝公司的通知，本協定即立刻終止。本協定終止時，請務必刪除本軟體的所有檔案。
