CAMLINK2 Ver 1.2 Installer
| 類型 | Software |
|---|---|
| 版本 | v1.2 |
| 更新日期 | 2024年10月15日 |
| 支援OS |
Windows 10 (64bit) Windows 11 |
| CAMLINK2 |
Install
- If older version is installed, uninstall older version.
- Execute [.exe] in the folder.
- Install CAMLINK2 according to installation wizard.
Serial Key
- If you have a CAMLINK2 serial key, you can install it free of charge. CAMLINK2 serial key is provided with the CAMLINK2 packaging box.
- License information cannot be inherited from CAMLINK.
- If you do not have a CAMLINK2 serial key, you can use a trial version for 30 days for free after installing CAMLINK2. There is no limitation on the trial version.
The following functions have been change
[Ver1.1 -> Ver1.2]
- The following functions has been added and improved for the CFX series.
(1)Tools used for output range check can now be selected from a pen or a laser pointer.
(2)The Arc Cut Speed function is now available.- The cutting speed of the circle and the arc can be set separately from the cutting speed of other shapes.
- By reducing only the cut speed of the circle and arc without decreasing the cut speed of the straight line, the cut time can be reduced while maintaining a beautiful finish.
※It cannot be used with Minimum Diameter Setting.※If the arc speed is set on the plotter's main unit, the plotter's main unit setting will take precedence. Refer to the CAMLINK2 manual for details. - You can change the size of the menu icon.
- You can change the size of the menu icon on the preferences screen.
- You can zoom in and out the edit screen with the mouse wheel.
[Ver1.0 -> Ver1.1]
- The following functions has been added and improved for the CFX series.
(1)Milling tool is supported. Finishing Cut at the time of milling.
(2) Improvement of V-cutting function- Z Uncut Value / V Cut Offset illustration has been changed to an easy-to-understand.
- [Auto] has been added to the V Cut Offset setting so that the folding width is calculated automatically without the user having to calculate it.
- Cutting straight Line of V-cutting has been optimized. Double-cut time reduction and clean-cut straight line are possible.
- Automatic registration function of repeated cutting has been implemented
- Existing model support
Supported model : CF22,CFL,CF2 - Assistance with transition from CAMLINK to CAMLINK2
For easy Transition, the conversion tool from CAMLINK to CAMLINK2 format has been implemented.
Conversion of database
Supported model : CF22,CFL,CF2
Supported version : CAMLINKv2.5 or later - Output can be executed with USB connection
Supported model : CF22,CFL
About manuals
Download from here.
The latest version that has been confirmed to operate
- Windows10 22H2
- Windows11 23H2
下載時的注意事項
下載本軟體前，請務必閱讀以下的使用許可協定。
軟體使用許可條款
若下載本軟體，則視同您同意受本協定所約束。
第1條.定義
- 此處所稱的「軟體」，指與本協定一同提供的電腦程式。
- 此處所稱的「相關資料」，指與本軟體一同提供的印刷文件檔案，或是敝公司之後所提供的印刷資料。
- 此處所稱的「本軟體」，指敝公司提供給客人的軟體、相關資料、及軟體的複製檔。
第2條.限制事項
- 根據本協定的條款，禁止複製本軟體。
- 禁止更改本軟體及進行逆向工程。此外，禁止轉讓、租賃、再授權給第三方，亦禁止移轉本協定的地位。
- 禁止透過租賃或疑似租賃行為將本軟體轉讓、授權或轉賣給第三方，亦禁止從第三方讓渡、接受使用權或購買。
- 禁止將本軟體當作二手品讓渡、授權給第三方，亦禁止從第三方接受使用權。
第3條.責任限制
- 軟體所含有的功能並不保證完全符合顧客的使用目的。
- 選擇安裝本軟體為顧客的行為責任，在電腦硬碟或繪圖器記憶體中安裝本軟體時，並不為其相關損害或操作上的損害做擔保。
- 關於本軟體的使用結果（包含收入或利益的損失），敝公司並不做任何責任上的擔保。
第4條.有效期限
- 本協定的有效期限是從顧客安裝本軟體開始算起。
- 顧客決定停止使用軟體時，本協定則自動終止。
- 顧客無法遵守本協定的條款時，毋須敝公司的通知，本協定即立刻終止。本協定終止時，請務必刪除本軟體的所有檔案。
