Mimaki Profile Master3.2.15 Installer
| 類型 | Software |
|---|---|
| 版本 | 3.2.15 |
| 更新日期 | 2025年04月25日 |
| 支援OS |
Windows 10 (64bit)
Windows 11 |
| Mimaki Profile Master 3 |
About this installer
- New installations and updates from MPM 3.1.17 or later to 3.2.15.
- When upgrading, all settings remain and are carried over to the new version, but be sure to back up your media information before updating, just to be safe.
- When upgrading, option values may be reset. When updating, keep a record of the option setting values in the version in use, and if the values are reset after the update, set them again. We plan to correct this issue in the next version.
- In case you are using older version than MPM3.1.17, please download MPM3.1.17 Update installer and update to 3.1.17 before use this update tool.
Release Note
Added Printers
TS330-3200DS, Tiger600-1800TS, Tx330-1800, Tx330-1800 Hybrid, JV200
Added Ink set
CJV200 CS250, SS21
Added Colorimeter
MYIRO-1: KONICA MINOLTA
Functional improvement
MPM3 can now be operated by standard users.
- License authentication is possible only with administrative privileges. Please use one of the following methods to activate your license. Even if you are signed in with an administrator account, please use one of the following methods.
- Select the MPM3 shortcut icon on the desktop, right-click, and select “Run as administrator” from the menu that appears. If you click the MPM3 icon as it is, an error message such as “The requested operation requires elevation” will appear, the license authentication screen will not appear, and MPM3 will not start.
- From the Windows Start menu, select [MimakiProfileMaster3] > [License Activation].
End of OS support
Support for Mimaki driver 32bit version ended on March 16, 2023.
Along with this, MPM3 support for Windows 10 32bit will be ended.
Install are possible, but operation is not guaranteed.
Notes for RasterLink
The device profile and emulation profile created by MPM3 is v3.5 as profile version. Supporting v3.5 profile and RasterLink is as follows.
| Application | Action |
|---|---|
| RasterLink7 | It can be used. |
| RasterLink6 | It can be used from Ver. 4.11 or later. v3.5 profile cannot be installed in Ver.4.11 or later. |
| RasterLinkPro5 | V3.5 profile cannot be used. |
Restrictions of this version
When selecting an ink set including Orange / Green, test printing cannot be executed except creating / editing an ICC profile.
When you select i1iO3 with i1Pro3 PLUS as a colorimeter, there are the following restrictions:
- Following cannot be executed for the ink set including Orange and Green:
- Device profile creation
- Color matching features （Calibration, Equalization, Emulation）
- Rotation cannot be specified when printing a chart for colorimetry with an ink set including Orange.
When you select i1iSis as a colorimeter, there are following restrictions:
- Emulation function cannot be used.
- Following cannot be executed for the ink set including Orange or Green:
- Device profile creation
- Color matching features (Calibration, Equalization, Emulation)
When updating from MPM3.2.14 or earlier to MPM3.2.15, the values of the following options may be reset. When updating, record the values of the options in the version you are using, and set them again if the values are reset after the update.
- Unit
- Language
- Color Matching mode
- USB2.0 Out Time-out, Output Buffer Length
- Ethernet Out Time-out, Output Buffer Length
For Ethernet connection：
- If you click [Cancel] while printing a chart or other output to the printer, the cancellation process may take up to 15 minutes. Please do not click [Cancel] if possible.
下載時的注意事項
下載本軟體前，請務必閱讀以下的使用許可協定。
軟體使用許可條款
若下載本軟體，則視同您同意受本協定所約束。
第1條.定義
- 此處所稱的「軟體」，指與本協定一同提供的電腦程式。
- 此處所稱的「相關資料」，指與本軟體一同提供的印刷文件檔案，或是敝公司之後所提供的印刷資料。
- 此處所稱的「本軟體」，指敝公司提供給客人的軟體、相關資料、及軟體的複製檔。
第2條.限制事項
- 根據本協定的條款，禁止複製本軟體。
- 禁止更改本軟體及進行逆向工程。此外，禁止轉讓、租賃、再授權給第三方，亦禁止移轉本協定的地位。
- 禁止透過租賃或疑似租賃行為將本軟體轉讓、授權或轉賣給第三方，亦禁止從第三方讓渡、接受使用權或購買。
- 禁止將本軟體當作二手品讓渡、授權給第三方，亦禁止從第三方接受使用權。
第3條.責任限制
- 軟體所含有的功能並不保證完全符合顧客的使用目的。
- 選擇安裝本軟體為顧客的行為責任，在電腦硬碟或繪圖器記憶體中安裝本軟體時，並不為其相關損害或操作上的損害做擔保。
- 關於本軟體的使用結果（包含收入或利益的損失），敝公司並不做任何責任上的擔保。
第4條.有效期限
- 本協定的有效期限是從顧客安裝本軟體開始算起。
- 顧客決定停止使用軟體時，本協定則自動終止。
- 顧客無法遵守本協定的條款時，毋須敝公司的通知，本協定即立刻終止。本協定終止時，請務必刪除本軟體的所有檔案。
